Geology (Thermodynamics) Model Test Paper
Earth Science,Geology Practice Paper
1. The bituminous coal is highly coking, if its
Earth Science,Geology Practice Paper
1. The bituminous coal is highly coking, if its
carbon content is
(a) 78 to 81%
(b) 81 to 81.82.5%
(c) 82.5 to 84%
(d) 84 to 89%
ANSWER: (a)
2. The ultimate analysis of coal is done
to determine
th e percentage of
(a) Carbon
(b) Sulphur and ash
(c) Hydrogen and nitrogen
(d) All of the above
ANSWER: (d)
3. Rank of coal is based on
(a) Ash content
(b) Moisture content
(c) Fixed carbon and heating value
(d) All of the above
ANSWER: (c)
4. A good fuel has
(a) Low ignition point and high calorific value
(b) Low ignition point and low calorific value
(c) High ignition point and high calorific
value
(d) High ignition point and low calorific
value.
ANSWER: (a)
5. Amount of heat obtained by the complete
combustion of 1 kg of a fuel, when the
products
of its combustion are cooled down to the
temperature of supplied air is known as
(a) Calorific value
(b) High calorific value
(c) Low calorific value
(d) none of the above
ANSWER: (b)
6. A
molecule consisting of three atoms is known as
(a) Monoatomic
(b) Diatomic
(c) Triatomic
(d) Polyatomic
ANSWER: (c)
7. The bituminuous coal is strongly
coking, its
carbon content is
(a) 7S to 81%
(b) 81 to 82.5%
(c) 82.5 to 84%
(d) 84 to 89%
ANSWER: (d)
8. In an ultimate analysis of coal, one of
the
constituents present is 3.5 %. This could be
(a) Carbon
(b) Ash
(c) Sulphur
(d) Moisture
ANSWER: (c)
9. Symptom showing incomplete combustion
of
coal is
(a) Presence of free carbon in exhaust
(b) Presence of oxygen is exhaust
(c) Presence of nitrogen in exhaust
(d) Presence of free CO in exhaust
ANSWER: (c)
heat liberated in kcal by
(a) Complete combustion of l kg of fuel
(b) Complete combustion of 1 m’ of fuel at
S.T.R
(c) Temperature rise of fuel of 1°C
(d) None of the above
ANSWER: (b)
11. Amount of heat liberated by the
complete
combustion of 1kg of fuel, is known as
(a) Calorific value
(b) High calorific value
(c) Low calorific value
(d) None of the above
ANSWER: (a)
12. A molecule consisting of one atom is
known as
(a) Monoatomic
(b) Diatomic
(c) Triatomic
(d) Polyatomic
ANSWER: (c)
13. When sulpher is burnt to sulphur
dioxide, there
is molecular
(a) Expansion
(b) Contraction
(c) Either expansion or contraction
(d) Expansion or contraction is not there
ANSWER: (d)
14. Which of the following is not a petroleum
product
(a) Petrol
(b) Kerosene
(c) Methylated spirit
(d) Lubricating oil
ANSWER: (c)
15. Liquid fuels as compared to solid fuels
have
calorific value
(a) Higher
(b) Lower
(c) Same
(d) None of the above
ANSWER: (a)
16. Liquid fuels as compared to solid fuels
have
(a) Higher efficiency
(b) Lower efficiency
(c) Same efficiency
(d) None of the above
ANSWER: (b)
17. In Bomb calorimeter; the fuel to be
tested is
burned at constant
(a) Pressure
(b) Volume
(c) Temperature
(d) None of the above
ANSWER: (b)
forced by external means, is known as .
(a) Free gas producer
(b) Forced gas producer
(c) Pressure gas producer
(d) Suction gas producer
ANSWER: (c)
19. Process of heating crude oil to a high
temperature
under very high pressure to increase the
yield of
lighter distillate, is known as
(a) Cracking fractional distillation
(b) Fractional distillation
(c) Carbonisation
(d) None of the above
ANSWER: (a)
20. Petrol is distilled at
(a) 65° to 220°C
(b) 225° to 350°C
(c) 345°' t0 450°C
(d) 470° to 550°C
ANSWER: (a)
21. Kerosene is distilled at
(a) 65°to220°C
(b) 225°to350°C
(c) 345° to 450°c
(d) 470° to 550°C
ANSWER: (b)
22. Bomb calorimeter is used to determine
(a) Higher calorific value of solid or luquid
fuels
(b) Lower calorific value of solid or liquid
fuels
(c) Calorific value of gaseous fuels
(d) Viscosity of liquids
ANSWER: (a)
23. Gas producers are used to determine
(a) Calorific value of gaseous fuel
(b) Calorific value of solid fuel
(c) Viscosity of a gas
(d) None of the above
ANSWER: (b)
24. Gas having highest calorific value is
(a) Coal gas
(b) Mond gas
(c) Blast furnace gas
(d) Coke oven gas
ANSWER: (d)
25. Bernoulli’s theorem deals with the
conservation of
(a) Mass
(b) Force
(c)
Momentum
(d) Energy
ANSWER:
(d)
No comments:
Post a Comment